Sensors

AZ750 DOOR LED SENSOR SURFACE MOUNTING

AZ752 HAND SENSOR ULTRA SLIM SURFACE MOUNTING

AZ750

  • Infrared switch
  • When the door or drawer is opened, the light comes on. When the door or drawer closes the light goes out.
  • Size: 21.2x18x7mm
  • 1 meter cable from the sensor to the detector.

AZ752

  • When the hand passes through the area, the light comes on.
  • When the hand passes a second time through the detection area the light will go out.

AZ753 PIR SENSOR SWITCH SURFACE MOUNTING

  • When the human presence is detected within the Detection Range, the switch is turned on, when the presence leaves the range for 45 seconds, the switch automatically turns off.

AZ793 TOUCH SWITCH HIDDEN BEHIND THE WOOD OR FURNITURE
  • Connection: LED-transformer DC12V/DC24V;
  • Max load: 40W
  • Surface-mounted,fixed by 3M tape easy installation;
  • Soft on/off function.

AZ933 RECESSED SENSOR HAND FUNCTION - DOOR FUNCTION

  • With button for change to hand - door function.

AZ933-N RECESSED SENSOR HAND FUNCTION

AZ933-P RECESSED SENSOR DOOR FUNCTION

AZ933-N

  • When the hand passes a second time through the detection area the light will go out

AZ933-P

  • When the door or drawer is opened, the light comes on.

AZ934 RECESSED PRESENCE SENSOR

  • DIMMER function for change the light intensity.

AZ754 LED REGULATOR ON/OFF TACTICAL INTENSITY RECESSED MOUNTING

  • When you touch the button on the bar, and release at 0.5 seconds, the switch will return to the setting state (High-Low-High)
  • Suitable for bedroom furniture or headboards in bed.

AZ755 LED REGULATOR TACTICAL INTENSITY DOUBLE CONTACT RECESSED MOUNTING

  • When the human touch ANY of the touch contact, then release within 0.5s, the switch status changes (ON/OFF)
  • When the human touch ANY of the touch contact over 0.5s, the switch will turn to adjustment status (low ‐ high ‐ low).

AZ757 LED DIMMER REGULATOR LED WITH RADIOFRECUENCY CONTROLLER

  • Control with ON / OFF function and increase and reduction of power. It incorporates memory functions.
  • The controller and remote are paired in default state. One controller could be paired with four remotes max.
  • To pairing newly added remotes, press any button within three seconds when the controller connected with driver and LED lamp with power. The LED light will flicker twice showing the pairing successfully completed.